Sales 0161 477 6652

M10 X 120mm Ceramic Tile Bit
Tile Max Drill Bits have a newly designed and unique "P95" precision tip
which has been diamond ground from the best quality tungsten.
This enables the user to drill through a wide range of materials
such as: PEI 5 Class Porcelain, Ceramics, Fine Stoneware, Marble,
Concrete, Engineering brick and even Granite!

The asymmetric drill design reduces resistance by 25% ensuring
that there is no wandering on start of drilling, there is also less
chance of cracking or chipping (dependant on tile type) which leads
to a perfectly formed round hole.

The low stress, high temperature brazing method used to attach the
tip to the shank, ensures that it remains attached under the most
extreme drilling conditions. The deep and wide fluting is able to
cope with the maximum amount of spoil removal.

The ingenious triangular shaped shank guarantees no slip rotation
in the drill machines chuck. Due to the tips unique self renewing
design, after frequent use on the hardest materials, the drill can be
then used on softer substrates.

Recommendations:
The drill bit works best on low revolution speeds and its life will
increase when used with water to cool the tip down. The drill bit
should only be used on the rotary setting and must not be used on
the hammer setting.